FORGED CLASS 1000 & CAST CLASS 150

Forged Hi - Pressure Class 2m, 3m, 6m

See Table

dot_clear.gif (807 bytes) Forged
1000 p.s.i. CWP Service		 Cast
150 p.s.i. Steam Service
Size 1/8 1/4 dot_clear.gif (54 bytes) dot_clear.gif (54 bytes)dot_clear.gif (54 bytes) 3/8 1/2 dot_clear.gif (54 bytes) dot_clear.gif (54 bytes)
A 13/16 13/16     15/16 1 1/8    
B 3/4 3/4     13/16 7/8    
C 1 13/16     1 7/16 1 5/8    
DIA 3/4 27/32     1 1/64 1 13/64    
  Cast
150 p.s.i. Stream Service		  
Size 3/4 1 1 1/4 1 1/2 2 21/2 3 4
A 1 5/16 1 1/2 1 3/4 1 15/16 2 1/4 2 11/16 3 1/16 3 3/16
B 1 1 1/8 1 5/16 1 7/16 1 11/16 1 15/16 2 3/16 2 5/8
C 1 7/8 2 1/8 2 7/16 2 11/16 3 1/4 3 7/8 4 1/2 5 11/16
DIA 1 15/32 1 13/16 2 3/16 2 15/32 3 3 19/32 4 9/32 5 13/32
Notes:
  1. Dimensions conform to MSS-SP-114
  2. Pipe Threads conform to ASME B1.20.1
  3. Forged 150 LB Fittings are suitable for use at 1000 psi CWP
  4. Reducing 90 Degree Elbows and Tees are available on request
  5. Socket-welding ends available on request

 
  Forged
High Pressure Service		  
Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2
  2000 p.s.i. Cold Non-Shock Service
A 13/16 13/16 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8
B 11/16 11/16 3/4 7/8 1 1 1/8 1 5/16 1 3/8 1 11/16
DIA 7/8 7/8 1 1/16 1 5/16 1 1/2 1 13/16 2 3/16 2 7/16 2 31/32
  3000 p.s.i. Cold Non-Shock Service
A 13/16 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2
B 11/16 3/4 7/8 1 1 1/8 1 5/16 1 3/8 1 11/16 1 23/32
DIA 7/8 1 1/16 1 5/16 1 1/2 113/16 2 3/16 2 7/16 2 31/32 3 5/16
  6000 p.s.i. Cold Non-Shock Service
A 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 -
B 3/4 7/8 1 1 1/8 1 5/16 1 3/8 1 11/16 1 23/32 -
DIA 1 1/16 1 5/16 1 1/2 1 13/16 2 3/16 2 7/16 2 31/32 3 5/16 -
   
Size 2 1/2 3              
  2000 p.s.i. Cold Non-Shock Service
A 3 3 3/8              
B - -              
DIA 3 5/8 4 5/16              
  3000 p.s.i. Cold Non-Shock Service
A 3 3/8 3 3/4              
B - -              
DIA 4 5/16 4 3/4              
Notes:
  1. Dimensions of 90s, Tees, 45s, and Crosses conform to ASME B16.11
  2. Cross Dimensions correspond to Center-to-end and Diameter dimensions of Tees.
  3. Pipe Threads conform to ASME B1.20.1
  4. Reducing 90 Degree Elbows, Tees, and Crosses are available upon request
  5. Dimensions of 3000 LB Street Elbows are available upon request
Alloy Stainless Products Corporate Headquarters
611 Union Boulevard | Totowa, NJ 07512
Phone: NJ Customers: (973) 256-1616 | Toll Free: 1-800-631-8372
Fax: NJ Customers: (973) 256-5256 | Toll Free: 1-800-432-9277

© Copyright 2007 Alloy Stainless Products Company, Inc. | Website Hosting by Service Internet Solutions